Plan the site before you open the boxes
The Belmont Swing Set arrives as a ready-to-assemble kit with pre-cut, pre-drilled, and pre-stained cedar pieces, plus guided instructions through the interactive BILT app. That preparation shortens assembly, but it does not remove the need to choose the site first. Decide where the set will live before you unpack anything, because moving a partly built wooden playset is far harder than moving a stack of cedar.
The supplied record describes the Belmont as a complete backyard playground with an elevated play deck, canopy roof, 8-foot wave slide, two belt swings, a trapeze, a rock wall ladder with six climbing holds, and a shaded snack bar with bench seating. Those features tell you what the set needs around it: room for the slide exit, clearance for swinging, and a level base under the whole structure. The record does not state a required safety perimeter or a manufacturer-specified clearance distance, so treat any spacing figure as a planning decision you confirm against the assembly instructions rather than a number this article can supply.
A practical order of work for the Belmont
The Belmont record confirms the kit contents and the BILT app guidance, but it does not list a step-by-step assembly sequence. The order below organizes the work around the decisions the record does support; follow the BILT app instructions for the actual build sequence.
- 1. Choose and clear the site: Pick a spot with room for the slide run-out and the swing arc, then clear the ground before any parts are laid out. The record does not specify a clearance radius, so measure the footprint and leave a generous buffer you can confirm against the instructions.
- 2. Prepare the ground: The Belmont has an elevated play deck and a lower sandbox area (sand not included). Plan a level base under the structure and decide now whether the lower area will be used as a sandbox, since filling it later is easier before the set is fully enclosed.
- 3. Sort the pre-cut, pre-drilled, pre-stained pieces: The kit is designed for easier installation with pre-cut, pre-drilled, and pre-stained pieces. Lay them out by assembly stage so the BILT app steps match what is in front of you.
- 4. Build the main structure and deck: The elevated play deck with canopy roof is the core of the set. Complete the frame and deck before attaching the slide, swings, trapeze, and rock wall ladder, so each add-on is fixed to a stable structure.
- 5. Attach the play features: The record lists an 8-foot wave slide, two belt swings, one trapeze, and a rock wall ladder with six climbing holds. Check each attachment against the BILT app instructions as you go.
- 6. Set up the snack bar and bench: The covered snack bar window with bench seating is part of the Belmont's layout. Position it where it will not block the slide exit or the swing path.
Ground preparation and anchoring: what the record does and does not settle
The Belmont is built from naturally durable cedar, which suits outdoor use, but the supplied record does not include an anchoring method, a footing specification, or a ground-preparation procedure. It also does not state a required surface type. That means you should not treat any particular anchoring approach as a manufacturer instruction for this set. Use the BILT app guidance and the assembly documentation that ships with the kit to confirm how the Belmont is intended to be secured.
What the record does support is the shape of the ground problem: the set has an elevated deck, a slide, and swinging elements, so the base needs to be level and stable before you build upward. If you are planning a sandbox in the lower area, note that sand is not included, so that is a separate purchase and a separate step in your site plan.
Belmont features that shape the setup
- Belmont Swing Set: Ready-to-assemble design with pre-cut, pre-drilled, and pre-stained pieces, plus guided instructions through the interactive BILT app. This is the supplied basis for the assembly approach: the kit is prepared for easier installation, and the BILT app is the stated source of guided instructions.

Belmont Swing Set - Belmont Swing Set: Elevated play deck with a brightly colored canopy roof that provides shade. The raised deck and roof are the main structure to complete before attaching the slide, swings, trapeze, and ladder.
- Belmont Swing Set: 8-foot wave slide, two belt swings, one trapeze, and a rock wall ladder with six climbing holds. These are the play features that need clearance and a stable attachment point; the record does not state a required safety spacing, so confirm distances in the instructions.
- Belmont Swing Set: Shaded snack bar with attached bench seating and a lower sandbox area (sand not included). These lower-level features affect how you use the space under and around the set, and the sandbox requires a separate sand purchase.
- Belmont Swing Set: Crafted from naturally durable cedar with a light brown finish; 5-year warranty. Cedar is the supplied material context for an outdoor wooden playset; the warranty is the stated coverage term.
Safety checks to build into the process
The Belmont record does not include a safety inspection checklist, a maximum user weight, an age range, or a required number of adults for assembly. Rather than invent those details, build your own checkpoints around what the record does confirm. After the main structure is up, verify that the deck and canopy roof are secure before adding the slide and swings. After the play features are attached, check that the rock wall ladder's six climbing holds are fixed and that the trapeze and belt swings hang clear of the structure. Keep the slide exit and the swing arc free of obstructions, and confirm the snack bar bench does not sit in a landing zone.
Because the record does not state a safety spacing figure, the most reliable next step is to read the BILT app instructions and the printed assembly guide for any clearance or anchoring requirements before you finalize the site. If those documents are not yet in hand, treat the setup as incomplete until you have them.
What to confirm before you buy
The Belmont Swing Set is listed at a catalog price of USD 551.31, with a catalog comparison price of USD 799.00, and the available variant evidence shows a Shipping Included option. Before ordering, confirm the footprint dimensions and required clearance from the assembly documentation, since the supplied record does not provide them. Also plan for the sandbox sand separately, because the record states sand is not included. If you are comparing the Belmont with other wooden swing sets, the features above—the elevated deck, 8-foot wave slide, two belt swings, trapeze, rock wall ladder, snack bar, and cedar construction—are the supplied points of difference to weigh.

