Back to Blog
How-to Guides 2026-11-20 Backyard Discovery | Swing Sets, Pergolas, Outdoor Kitchens 0 views

20x20 Kingsport Carport Assembly Guide

20x20 Kingsport Carport Assembly Guide

Learn how to assemble your 20x20 Kingsport Carport with practical steps, site prep tips, and what to expect from the included BILT® app and PowerPort™.

Getting Started with Your 20x20 Kingsport Carport

The 20x20 Kingsport Carport from Backyard Discovery is a spacious wooden carport built to protect vehicles, boats, or outdoor equipment. Assembly requires careful site preparation and following the included instructions. This guide covers what the kit provides and what you need to plan for a successful build.

What the Kit Includes

  • 20x20 Kingsport Carport: The carport is built from premium, 100% cedar wood for natural durability and features a heavy-duty 29-gauge galvanized steel roof for corrosion resistance. Cedar is naturally resistant to rot and insects, so it holds up well outdoors. The steel roof adds long-lasting protection against rain and snow without rusting.
    20x20 Kingsport Carport
    20x20 Kingsport Carport
  • 20x20 Kingsport Carport: The kit comes with ready-to-assemble components and guided instructions with the interactive BILT® app for easier installation. The BILT® app provides 3D step-by-step guidance, which can reduce assembly errors and make the process clearer than paper-only instructions.
  • 20x20 Kingsport Carport: The patented PowerPort™ features three electrical outlets and three USB ports, allowing you to power lighting, tools, devices, and more. This built-in convenience means you can run extension cords for tools during assembly and later use the outlets for lights or chargers without adding external wiring.

Assembly Steps Based on Supplied Information

The following steps are derived from what the Kingsport Carport record confirms. For full details, refer to the included manual and BILT® app.

  1. 1. Prepare the site: Choose a level area large enough for the 20x20 footprint. Clear debris and ensure the ground is firm. The record does not specify a required foundation type, so you may need to consult local building codes or a contractor for anchoring options.
  2. 2. Organize components and download the BILT® app: Unpack all parts and verify you have everything listed. Download the BILT® app on your phone or tablet for interactive 3D assembly instructions.
  3. 3. Assemble the frame and roof: Follow the BILT® app steps to build the cedar frame and attach the galvanized steel roof panels. The heavy-duty sloped roof design prevents water accumulation, so ensure proper alignment during installation.
  4. 4. Install the PowerPort™: The PowerPort™ comes pre-configured with three outlets and three USB ports. Mount it according to the instructions, ideally in a location that is accessible yet protected from direct rain.
  5. 5. Anchor the carport: The carport is Pro-Tect™ tested to withstand wind speeds up to 100 mph* and a roof load of up to 20,800 pounds. Proper anchoring is critical to achieve these ratings. The record does not specify anchor type, so use appropriate ground anchors for your soil conditions.

What the Record Leaves Open

The supplied information does not include specific foundation requirements, anchor types, or detailed assembly sequences beyond what the BILT® app provides. For site preparation and anchoring, consult local building codes or a professional installer to ensure the carport meets your local wind and snow load requirements.

Related Articles

Customer Service
Home
Products
Cart
Profile